Data Donation App

Help improve JK-BMS support anonymously.

No account. Opt-in off by default. You review every field before anything is sent.

JK BMS Contributor reads a JK-BMS over Bluetooth and lets you donate its data for compatibility research. It is read-only, it is opt-in, and nothing leaves your phone until you review it and press submit.

No accountOpt-inAnonymisedRead-onlyAndroid 7.0+

com.jkbmsr.contributor•Android 7.0+

Opt-in
Off by default
No account
Nothing identifies you
Review
See every field first
Read-only
Never writes to the BMS

Why an app for donating data

JK BMS Remote supports JK-BMS only, and every new hardware revision and firmware version is a chance for the protocol to differ. JK BMS Contributor exists to close that gap: it reads a real pack and lets you share what it reports, so support can be built on real frames instead of guesses.

The app is built around restraint. It opens on a consent screen that blocks until you answer, and contributing starts switched off: the accept button stays disabled until you turn it on. Decline and the app still works; you can turn it back on any time from the home screen.

What it contributes is a single anonymous document: the battery's own JK02 frames, the device model and firmware strings it reports, and decoded telemetry samples. It carries a random identifier that is never derived from you or your device, and it creates no account.

Privacy is the whole point of the app

The design decisions that make a data-donation app something you can actually choose.

🔒

Blocking consent, off by default

The first screen is a consent decision, and it starts switched off. Nothing is captured or sent until you turn it on.

🔍

Review before you send

You see the exact document the app would submit and can uncheck any field the review shows. The battery serial is off by default.

📦

A minimal envelope

Only the fields the research needs: device model and firmware strings, decoded samples and the raw frames, plus your app build and OS version (never the phone model).

🛡️

Read-only, always

The app only reads what your BMS already broadcasts. It never writes a setting, a switch or a parameter.

💾

Offline export fallback

If the network is unavailable, or you would rather not send it now, the same bytes can be saved to a file and shared yourself.

🧪

Anonymised by design

No account, no analytics SDK, no advertising ID. The Bluetooth address is reduced to its vendor prefix and dates are kept only as a year and month.

Privacy by design

Exactly what is shared, and what is not

The consent screen in the app, in the same words it shows you.

What a contribution carries

  • Real JK02 frames from your JK-BMS (the battery's own bytes)
  • Device model, hardware and firmware version strings
  • Decoded telemetry samples: voltage, current, temperature, state of charge, cell voltages and alarm flags
  • Optionally, a settings snapshot and the on-board logbook
  • Your app build, platform and OS version (never the phone model)

What is never collected

  • No account, no email, no name: you are never identified
  • No location, contacts, files, phone state or advertising ID
  • The battery serial number (withheld by default, opt-in per contribution)
  • The full Bluetooth or MAC address (only the vendor prefix is kept)
  • Day-level device dates (the manufacturing date is kept only as a year and month)

The server sees the connecting IP address in order to answer the request; it is not stored. If you opt the serial in, the server keeps only a salted hash and discards the raw value.

From consent to contribution

Four steps, and you can stop at any of them.

STEP 01🔒

1. Read the consent screen

The app explains what it collects and what it never collects, then waits. Contributing starts off.

STEP 02📡

2. Start a capture

Scan for a JK-BMS, connect, and let the app read the device-info and cell-info frames.

STEP 03🔍

3. Review the payload

See the exact document and uncheck any field you would rather not share. The serial is off unless you turn it on.

STEP 04📤

4. Submit or export

Send it anonymously with no account, or save the same bytes to a file and share them yourself.

Which app do I need?

The three apps do different jobs. Most people need at most two of them.

The Bluetooth app works alone, straight from phone to battery. The Remote app needs a gateway you have already flashed. The Contributor app is a small, opt-in way to give back.

FeatureJK BMS BluetoothJK BMS RemoteJK BMS Contributor
What it's forLocal Bluetooth monitoringRemote monitoring via a gatewayAnonymous data donation
Connects to the batteryDirectly over BluetoothThrough an ESP32 gatewayDirectly over Bluetooth
Needs a gatewayNoYesNo
Needs a cloud accountNoYesNo
Works offlineYesNoYes (capture and export)
Controls the BMSYes, PIN-gatedNo (read-only)No (read-only)
Push alertsNoYesNo
PlatformAndroid 6.0+Android 8.0+Android 7.0+
Google PlayAvailableAvailableAvailable

Built to be trusted with nothing

The app carries no account, no ads and no analytics.

No account or login No ads No analytics SDK No crash-reporting SDK No advertising ID No location permission on Android 12+

Want to help improve JK-BMS support?

Free on Google Play. No account, and nothing is sent until you review it.

Get JK BMS Contributor on Google PlayRead the docsFollow updates

Questions about the Contributor app

Is JK BMS Contributor available on Google Play?
Yes, it is free on Google Play, and the download button on this page goes straight to it. No account is needed to install or use it.
Do I need an account to use it?
No. There is no sign-up, no login, and no token. A contribution is posted anonymously.
What exactly gets sent?
The battery's raw frames, the device model and firmware strings it reports, decoded telemetry samples, and your app build and OS version. You see the exact document on the review screen and can uncheck the fields it lists before anything is sent.
Does it write anything to my battery?
No. The app is read-only: it only reads the telemetry your BMS already broadcasts over Bluetooth.
What if I have no internet connection when I capture?
Nothing is lost. You can export the same payload to a file and share it yourself whenever you like.
Can I decline and still use the app?
Yes. Contributing is opt-in and starts switched off, and declining leaves the app usable. You can turn it back on from the home screen at any time.

JK BMS Contributor

Anonymous, opt-in and read-only. Not on Google Play yet: watch this space.

Get JK BMS Contributor on Google PlayRead the docsFollow updates